|
Unusual Fabrication Hand made parts for truly custom vehicles |
|
4-Link Mounting Tabs |
|
Unusual Fabrications products are designed and manufactured for off-road/show vehicle use only. By installing these products on your vehicle you do so at your own risk. Please be safe and use these products accordingly. |
|
MiniTrucks Hot Rods Lowriders 4x4s Customs Classics |
|
Control Arms Crossmembers 2, 3, 4, 5, and 6 links Weld In Bungs 2x3 Notches Bridge kits |
|
4-Link Axle Tab |
|
These .250 thick tabs use 9/16 bolts and are available for 2.750, 3.000, 3.500, and 4.000 axle tubes. The distance is 3.500 from the top of the notch to the center of the bolt hole. |
|
4-Link Triangulated Axle Tab |
|
4-Link Offset Triangulated Axle Tab |
|
4-Link Parallel Axle Tab |
|
4-Link Flat Tab Long |
|
4-Link Flat Tab Short |
|
These .250 thick tabs use 9/16 bolts and are available for 2.750, 3.000, 3.500, and 4.000 axle tubes. The distance is 2.500 from the top of the notch to the center of the bolt hole. |
|
These .250 thick tabs use 9/16 bolts and are available for 3.000 axle tubes. The distance is 3.500 from the top of the notch to the center of the bolt hole. |
|
These .250 thick tabs use 9/16 bolts and are available for 2.750, 3.000, 3.500, and 4.000 axle tubes. Four tabs are required to install a parallel 4-link. |
|
These .250 thick tabs use 9/16 bolts and the distance is 4.250 from the flat to the center of the bolt hole, $5.99 each. |
|
These .250 thick tabs use 9/16 bolts and the distance is 2.250 from the flat to the center of the bolt hole, $5.99 each. |
|
To contact us: Unusual Fabrication LLC Pierson, MI 49339 Phone: (616)813-8787 E-mail: Info@UnusualFabrication.com |