|
Unusual Fabrication “Hand made parts for truly custom vehicles” |
|
1954 Chevy Sedan Delivery |
|
Unusual Fabrication’s products are designed and manufactured for off-road/show vehicle use only. By installing these products on your vehicle you do so “at your own risk”. Please be safe and use these products accordingly. |
|
• MiniTrucks • Hot Rods • Lowriders • 4x4’s • Customs • Classics • |
|
• Control Arms • Crossmembers • 2, 3, 4, 5, and 6 links • Weld In Bungs • 2x3 Notches • Bridge kits • |
|
To contact us: Unusual Fabrication LLC Pierson, MI 49339 Phone: (616)813-8787 E-mail: Info@UnusualFabrication.com |
|
Finally back to the shop! |
|
Yes, this thing is pretty quick. |
|
The uncoated 8 gallon fuel tank that takes forever to fill... |
|
Now to make a patch for the hole in the upper left corner. |
|
Patch panel made. |
|
All welded in! |
|
This panel will cover the hole in the floor after the cell is in. |
|
The first test fit went great! |
|
All sheared to size. |
|
Here is the basic shape tacked together. |
|
Baffles tacked in. |
|
Throwing down some welds! |
|
Sump made and welded up. |
|
Now that the sump is welded on I’ll add some bungs. |
|
Machined up some bungs an welded them into the sump. |
|
I made some mounting brackets and added the neck. |
|
With everything hooked up it’s ready to rock and roll! All that’s left is to attached the stainless steel cover that I made with the bead roller earlier and its all finished. |
|
Back on the open road!!! |